Raw Data With Nightwatch

22 Nov

Revision for “Raw Data With Nightwatch” created on November 22, 2015 @ 17:59:13

Title
Raw Data With Nightwatch
Content
Nightwatch can show raw for data coming from NightScout or xDrip. <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw01.png"><img class="alignnone size-full wp-image-3245" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw01.png" alt="nw01" width="280" height="280" /></a> <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw02.png"><img class="alignnone size-medium wp-image-3246" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw02.png" alt="nw02" width="280" height="280" /></a> <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw03.png"><img class="alignnone size-full wp-image-3247" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw03.png" alt="nw03" width="280" height="280" /></a> In order to see a trend, the raw values from the last 15 minutes are shown. There are 3 timeslots accordingly:The rightmost number is not older than 5 minutes, the middle number is between 5 and 10 minutes old, the leftmost number is at least 10 minutes old but not older than 15 minutes. <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw04.png"><img class="alignnone size-medium wp-image-3248" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw04-200x300.png" alt="nw04" width="200" height="300" /></a> In case there is no raw value (e.g. share server as data source), no raw value computable (e.g. missing calibration info) or no data at all, the corresponding timeslot will show an "x". How to enable raw on Android Wear? 1. Open the Nightwatch Preferences by swiping from the right edge to the left (appstarter) and select the app "Nightw. Prefs"- 2. Enable either "Show Raw" or "Show Raw on ???" <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw05.png"><img class="alignnone size-full wp-image-3249" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw05.png" alt="nw05" width="280" height="280" /></a> "Show Raw" will always show the raw values. "Show Raw on ???" will just show raw, if the main value shows "???" (e.g. the dexcom system reckons the signal too noisy to show data). <a href="http://www.nightscout.info/wp-content/uploads/2015/02/nw06.png"><img class="alignnone size-full wp-image-3250" src="http://www.nightscout.info/wp-content/uploads/2015/02/nw06.png" alt="nw06" width="280" height="280" /></a>
Excerpt


OldNewDate CreatedAuthorActions
November 22, 2015 @ 17:59:13 Kate Farnsworth
November 22, 2015 @ 17:41:54 Kate Farnsworth